Close Recently added item(s)
You have no items in your shopping cart.
Engineered for power and total efficiency, the Supreme 190 hockey skates incorporate many of Bauer's industry leading innovations, and packs them into this ,high value, high performance skate.
The 190 features classic Supreme fit and feel; a generous anatomical fit provides a slightly wider forefoot, with zero negative space throughout the heel and ankle, resulting in great comfort, and unmatched energy transfer. The Lightweight Anaform ankle padding is contoured to the natural shape of your foot, as is the nicely sculpted outer shell. These features, combined with the amazing heatmolding properties of the same 3D Anaformable Curv® Composite upper found in the MX3, provide an incredible 360 degree fit.
The Tuuk Lightspeed Edge Holder makes its debut in the Supreme line, allowing players to switch out runners on the fly. The Light Speed 3 EDGE runners found on the Supreme 190 provide added sharpening life, an even greater angle of attack, and are perfect for custom profiling.
The Form Fit 3 tongue is a 3-piece, 52 oz, pro felt design, with an added abrasion resistant metatarsal guard, and provides excellent comfort and protection. The Free Flex Tendon Guard, also found on the top of the line MX3, has been reengineered, and now moves with the player, allowing for maximum range of motion, while still providing a “spring board” effect to every stride.
The Hydra Max liner is lightweight, comfortable, and dries quickly, keeping your skates fresh, and helping to prolong the life of the boot. Add Bauer’s Comfort Edge feature which alleviates abrasion when digging into tight turns, and you have a boot that’s as comfortable as it is powerful.
By sacrificing the Fusion runner, Hydro Max 2 liner, Injected Stability Lacing system, and a few other features, Bauer has brought much of the strength and efficiency of the MX3 to a friendlier price point. If you’re a power skater looking for top of the line features at a great price point, check out the Bauer Supreme 190; it may give you the most bang for your buck.
|Player Profile||Designed for the skater that is looking for explosive power and total efficiency from every stride|
|Fit Profile||Anaform Fit - anatomically correct boot and insole / standard depth, least amount of wrap, standard width and anatomical heel|
|Quarter Package||3D Anaformable Curv® Composite upper|
|Heel Support||Anatomically designed heel counter|
|Ankle Padding||Lightweight anaform fit foam ankle pads|
|Tendon Guard||Patented Free-Flex Flexible design|
|Lining Material||HYDRA-MAX with Total Edge Comfort at High Ankle Edge|
|Tongue||FORM-FIT 3 - Anatomical, 52 oz. 3-piece pro felt with integrated abrasion resistant high-density metatarsal guard|
|Footbed||FORM-FIT+ with stabilizer grip, heel stabilizer and moisture management|
|Blade Holder||TUUK Lightspeed EDGE|
|Runner||"TUUK LS 3 stainless steel - high steel profile, 10 ft radius |
(size 4 - 12) / jr size 1 - 3.5 comes with LS 2"
Skate Weights are determined using a size 8.0 regular width senior skate, a size 3.0 regular width junior skate, or a 11.0 regular width youth skate.
Bauer Skate Sizing Chart - Senior
|US Men's Shoe Size||7.5||8.0||8.5||9.0||9.5||10.0||10.5||11.0||11.5||12.0||12.5||13.0||13.5|
|EUR Shoe Size||40.5||41.0||42.0||42.5||43.0||44.0||44.5||45.0||45.5||46.0||47.0||47.5||48.0|
|UK Men's Shoe Size||6.5||7.0||7.5||8.0||8.5||9.5||9.5||10.0||10.5||11.0||11.5||12.0||12.5|
Actual Shoe Size as determined by a Branock Shoe Sizing Device. Size information listed, is directly from the manufacturer.
I have been using vapors for a long time and they were killing m feet. Saw these babys on sale and got them. They are really comfortable and the free flex tendon guard lets you extend your stride more. I put the bauer speed plates in them and that just made them even more comfortable. I feel like I dont even have skates on. I tried the MX3s but didnt like the tounge and they didnt have my size. These are essentially the same though.Review by Hockey71 (Posted on 11/1/2016)
Eyelets are falling out and at a time of need. This is very very annoyingReview by Jim the friend (Posted on 7/24/2016)
I have had these skates for about three weeks now. They felt great right out of the box, just baked them and then they fit great. The big difference if you are comming off the standard tuuk holders is the hight difference. The new edge holders together with the LS3 steel makes these skates turn much sharper than my last vapor x.7 skates for sure! The fit is also great, and with the hydra max liner the skates are dry after a couple of hours. Do not hesitate to buy these skates if you are skating alot and need a boot that is almost exactly the same as the MX3 for a smaller price tag.Review by Sid (Posted on 7/24/2016)
It has been an awesome skate so far. I've only had them for 2 weeks and skated on them like 10 times but they have been very comfy and felt good. I did notice that the blue from the Hydro Max liner has turned parts of the tounge blue but other than that they have been aweosme. This was a Christmas gift from my parents.Review by Cetin (Posted on 7/24/2016)
Very good skates. I have used them about four times a week for ten months and I am very pleased. And they are still like new.Review by Shs no. 8 (Posted on 7/24/2016)
I was previously using the Bauer APX skates, and I intended to buy the APX2 skates...but I tried on a pair of the Bauer 190's, and they felt great even before the bake...even better afterwards. The tongue is perfect...balanced flex...and not thin like so many others. I can't think of even one issue. I did try on the MX3's also...they felt great (essentially the same skate)...but I like the tongue on the 190's better. One other note: the skate comes with the ls3 runner, which I have not yet tried...I'm used to the shorter radius of the ls2 and the fusion edge which I used in place of the ls3...so I can't comment on the ls3 runner...and I haven't take a puck to the skate yet (so not sure how that will feel yet). I know a few other guys who have the 190's, and they feel the same...a great skate.Review by Birch (Posted on 7/24/2016)
I had the one.9s which I loved other than when I skated on really hard ice my feet froze even when I was wearing thicker socks. But these feel amazing and they are plenty warm. I tried on the mx3s as well, but chose the 190s because they felt more comfortable, and when I got them baked they were the most comfortable skate I have ever had. First time using the LS3 runner. I can cut harder than ever. Ive had them for a solid couple of months and have played probably 20 games in them and have taken a few wrist shots but no slapshots yet, they are durable and it didn't hurt at all. Overall great skate.Review by Blake (Posted on 7/24/2016)
Just bought these a few days ago. I have worn them twice so far, literally comfort as you skate the first day after getting them baked. It was weird going to these new runners on the skates with the higher than normal runner, but once skated on a couple times I was able to adjust no problem. Recommend this product to anyone who is looking for a high end skate.Review by BEVO (Posted on 7/24/2016)
Had an upgrade from previous skates, and can't ask for more. Fit perfect from the box and could of got away without a bake. Tongue protects against ALL of lace bite and feels awesome. Super stiff but can still support your ankle properly. Can definitely tell a difference with the extra height and love it. The best skates yet.Review by Dean Steen (Posted on 7/24/2016)
This was my first pair after 6 years of another skate. I've used them about 5 times and they hurt a lot. Also, the blade seems a lot larger which affects me a lot, idk about other people. However, they are very stiff and supportive and once broken in I can tell they are going to be nice.Review by mike (Posted on 7/24/2016)
The Skate Boot is covered against defects in manufacturing and workmanship for a period of 90 days from the date of purchase.
The Holder is covered against defects in manufacturing and workmanship for a period of 365 days from the date of purchase.
The Runner is covered against defects in manufacturing and workmanship for a period of 90 days from the date of purchase.