If you're looking to join the growing number of RBZ™ stick users, but are looking for a little more value for your dollar - the RBZ™ 100 stick from CCM might just be the one for you! Not only does the RBZ™ 100 share a lot of the same technology as the RBZ™ Stage 2, but it also comes with an extended manufacturers warranty of up to 45 days.
The RBZ™ 100 stick features what CCM likes to refer to as Power Swing Technology. This has a direct correlation to what golfers refer to as swing speed and basically means optimal weight distribution in order to give you a balanced stick with a smooth and fast swing motion. Just like the RBZ™ Stage 2, it has a constant flex profile in the shaft which gives you a Custom Kick Point that is determined by the placement of your lower hand. Instead of the kick point being predetermined by the sticks construction for a specific type of release, the RBZ™ 100 adapts to your playing style.
For the construction of the shaft, CCM uses a combination of aerial grade carbon and fiberglass reinforcement which contributes to the added durability of this stick. The senior shaft uses a Traditional geometry with square-corners, while the intermediate, junior and youth uses a Contoured geometry with rounded corners for better fit and feel for smaller hands. The RBZ™ 100 comes with the grip finish.
There's really no visible taper to the stick because of the constant flex profile, just a nice transition of where the blade and shaft meet.
Just like the RBZ™ Stage 2, the RBZ™ 100 has similar blade construction which makes it Freakishly Fast. It has Speedblade 2 with Freak Channels. Instead of using foam in the core like most sticks, finely tuned channels circulate through the blade in such a way that the coefficient of restitution, or C.O.R. is increased. Basically, this is a trampoline effect of the amount of energy return at the point of impact which results in a shot with increased velocity. These are some of the same principles that power the TaylorMade® Rocketballz™, which is why you'll find the "Powered by TaylorMade®" graphic proudly displayed on the stick. The main difference between the RBZ™ Stage 2 and this RBZ™ 100 is that both the shaft and the blade wrap uses the combination of aerial grade carbon and fiberglass, which makes the overall weight of this stick slightly heavier than the Stage 2.
Get premium technology and performance with the added value of an extended 45 day warranty with the RBZ™ 100 stick from CCM.
The CCM RBZ 100 Hockey stick is covered by a 45 day warranty instead of the typical 30 day warranty.
Reebok-CCM Hockey ("Reebok-CCM") seeks to produce sticks of the highest quality, performance and durability and achieve the lowest return rate in the industry. As such, Reebok-CCM composite one piece player and goalie sticks and shafts are covered by a manufacturer's limited warranty against manufacturing defects for 30 days from date of purchase by consumer.
This limited warranty applies to one piece composite hockey player and goalie sticks and shafts that meet the specific Warranty Replacement Conditions detailed below, and is provided only to the original purchaser. This warranty is a one-time replacement, and does not cover sticks or shafts that were previously provided as a warranty replacement. Should the defective stick be a discontinued product, or otherwise not available at the time of the warranty request, Reebok-CCM reserves the right to substitute the replacement product with a comparable model.
This warranty does not apply to composite or wood stick blades, wood player or goalie sticks or Professional, Junior and College team sales.
All warranty returns are accompanied by a Return Authorization (RA) number from
Reebok-CCM. All warranty returns must be received by Reebok-CCM within 14 days
of issuance of the Reebok-CCM RA number.
The request for replacement of the stick or shaft is made within 30 days of
purchase of the stick or shaft by the consumer, as evidenced by an original
The consumer ships the full stick to Reebok-CCM and provides the original
receipt for that stick or shaft from an authorized Reebok-CCM retailer. The
receipt must include the authentic stick or shaft serial number sticker affixed
to the receipt, and the serial number must match the serial number of the stick
or shaft being returned. You may make a clean cut on the stick, away from the
break, for shipping.
The breakage is determined to be the result of a manufacturing defect, and
determined by Reebok-CCM to not be the result of abuse or any of the following
- Contact with another player, skate blade, goal post or rink boards
- The stick is exposed to any type of open flame or heat source which modifies its
- The blade or paddle is tampered with a rasp, file or sandpaper
If you feel that your stick fits this criteria, please proceed to