The Sickick IV series of sticks from Reebok is all about control, accuracy and a quick release. The quick release comes from the low-mid kick point, while control and accuracy come from their Dual Matrix II™ and AccuBlade™ technologies which are also found throughout the line. The 16K is a nicely balanced stick that is among the lightest in its class.
Reebok uses a carbon fiber and fiberglass construction for this stick. The senior shaft uses a Traditional geometry with square-corners. The 16K is available with Reebok's Griptonite finish, which offers a full grip coating on the shaft.
The gradual taper of the stick is what gives it the low-mid kick point and is where you'll find the Fuse construction or traditional tenon and shaft connection point.
Dual Matrix II™ is technology that is used in the shaft and the blade of the stick, but is clearly visible in the blade. The orientation of the fibers on the forehand are at 0° and 90°, while the fibers on the backhand are at 45°. This variation causes tension during loading that creates a slingshot effect on release. The other technology that Reebok uses is called AccuBlade™. This is a foam core blade that gets stiffer as you go from heel to toe resulting in less torqueing to keep the blade face closed.
If you're looking for a stick that is relatively lightweight and offers great value take a look at the 16K from Reebok.
Reebok-CCM Hockey ("Reebok-CCM") seeks to produce sticks of the highest quality, performance and durability and achieve the lowest return rate in the industry. As such, Reebok-CCM composite one piece player and goalie sticks and shafts are covered by a manufacturer's limited warranty against manufacturing defects for 30 days from date of purchase by consumer.
This limited warranty applies to one piece composite hockey player and goalie sticks and shafts that meet the specific Warranty Replacement Conditions detailed below, and is provided only to the original purchaser. This warranty is a one-time replacement, and does not cover sticks or shafts that were previously provided as a warranty replacement. Should the defective stick be a discontinued product, or otherwise not available at the time of the warranty request, Reebok-CCM reserves the right to substitute the replacement product with a comparable model.
This warranty does not apply to composite or wood stick blades, wood player or goalie sticks or Professional, Junior and College team sales.
All warranty returns are accompanied by a Return Authorization (RA) number from
Reebok-CCM. All warranty returns must be received by Reebok-CCM within 14 days
of issuance of the Reebok-CCM RA number.
The request for replacement of the stick or shaft is made within 30 days of
purchase of the stick or shaft by the consumer, as evidenced by an original
The consumer ships the full stick to Reebok-CCM and provides the original
receipt for that stick or shaft from an authorized Reebok-CCM retailer. The
receipt must include the authentic stick or shaft serial number sticker affixed
to the receipt, and the serial number must match the serial number of the stick
or shaft being returned. You may make a clean cut on the stick, away from the
break, for shipping.
The breakage is determined to be the result of a manufacturing defect, and
determined by Reebok-CCM to not be the result of abuse or any of the following
- Contact with another player, skate blade, goal post or rink boards
- The stick is exposed to any type of open flame or heat source which modifies its
- The blade or paddle is tampered with a rasp, file or sandpaper
If you feel that your stick fits this criteria, please proceed to