Step Steel ST Pro Runners for EBlade Pro & Prolite Plastic Holder - Pair

Step Steel ST Pro Runners for EBlade Pro & Prolite Plastic Holder - Pair

Item #: step-steel-sc-STPRO

Availability: In stock

Original Price $64.99

Our Price $58.99

Step Steel ST Pro Runners for EBlade Pro & Prolite Plastic Holder - Pair

Required Field*


Will fit exactly the same as original steel. STEP steel is the choice among proshops and players in the NHL, AHL, ECHL, CHL, OHL, QMJHL, NCAA...
  • Made with high quality Swedish steel!
  • Flawless side finish for superior edge quality!
  • More steel for added skate lean and increased blade life!
  • Pitch corrected profiles with no lumps or flat spots!
  • Step Steel Sizing Chart
    *St Speed will fit TUUK LIGHTSPEED and LIGHTSPEED II Plastic Holder*
    Boot Size 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6 6.5 7 7.5 8 8.5 9 9.5 10 10.5 11 11.5 12
    Holder Size 212 212 221 221 230 230 238 238 246 246 254 254 263 263 272 272 280 280 288 288 296 296 306
    Step Steel Size 210 210 220 220 230 230 238 238 245 245 254 254 263 263 272 272 280 280 288 288 296 296 306

    Please Note: Sizing information is provided by the manufacturer and does not guarantee a perfect fit.

    Product Questions

    No questions yet. Be the first to ask the question!

    Customer Reviews


    These blades are great. The edge holds tight and I was able to lean lower on my edges then any other blade I have used.

    Review by FTP (Posted on 7/24/2016)
    A nice upgrade

    I picked these up after a shot bent one of the stock scalloped steel runners on my U+ Pro Reloadeds. The stock scalloped steel from CCM is somewhat lighter, but doesn't hold an edge nearly as well as the Step Steel. The scalloped steel is also more susceptible to breaking and bending than the solid Step Steel blades. I referee more than I play, so I tend to value reliability more than achieving the absolute minimum weight. Since these also hold an edge better, I end up spending less on sharpenings, which keeps more of my ref income in my pocket.

    Review by iwearstripes (Posted on 7/24/2016)
    Best Steel for the price!

    I was a bit skeptical at first but I put these steels in my CCMU+12's and they are amazing! I normally get a 3/8 hollow and I couldn't believe how hard these cut into the ice commpaired the the stock ccm steels I used before. I had to chagne to a 1/2" hollow because the 3/8" felt too grabbby. I replaced the scalloped steels in my ccm skates which felt very soft and flexible when out of the holder and these are very stiff, which equated to more energy transfer to the ice.

    The only thing to be aware of is that you will have to get these steels profiled before using them. I tried just to have them sharpened and the profile is way off from a stock ccm steel. felt more biased to the back. But Step Steel does add extra steel all the way through the blade just for this reason, to allow people to use their prefered profile and still have the benefits of a taller steel.

    I will be buying these again when I need new steel.

    Review by CdnMisfit (Posted on 7/24/2016)
    Great Replacement for Rocket Blades

    I skate a few times a week and I dreaded sharpening or having my skates sharpened. The rocket blades may be lighter, but its tougher to get a nice sharp blade. I took a risk venturing away from stock CCM steel but i have not been disappointed.

    Review by Nate (Posted on 7/24/2016)
    The best runners, period.

    Regardless of boot, be it any brand, any model, STEP STEEL runners ARE hands down the finest runners, period. I cannot emphasize this enough.

    Most individuals pay no attention to what comes from the factory. If only they knew. Further, most individuals have no idea of - the importance of - getting runners profiled (via template only!!!!!), but that's another story..........

    The quality of the steel, the processing, the forging of STEP STEEL so vastly surpasses that of any factory blade as to beggar description. The upshot.......... Vastly better durability more than anything else which is big. These runners hold an edge far longer than any other available, period. And when properly sharpened better glide. It's all in the metal and processing folks. You add this up and it's a no brainer. Do yourself a favor and buy a set. You have no idea what you're missing.

    Review by John (Posted on 7/24/2016)

    Write Your Own Review

    You're reviewing: Step Steel ST Pro Runners for EBlade Pro & Prolite Plastic Holder - Pair

    How do you rate this product? *

      1 star 2 stars 3 stars 4 stars 5 stars

    Step Runners are covered against defects in manufacturing and workmanship for a period of 90 days from the date of purchase.